로고

- 유변 물성 측정기
  (Rheometers)

- 점도계
  (Viscometers)

- Particle System
  Characterization in Process

- 계면 화학 관련 기기
  (Contact Angle)

- 나노파이버, 나노파티클 연구
  및 생산 장비(eSpinning & eSpray)

- 아스팔트,토양 재료 물성 측정기
  (Asphalt & Soil Applications)

- 식품 물성 측정 분석기
  (Food Texture Analyzer)

- 항온 순환조 (Circulator)
  & Fogging Tester

- Material Processing & On-line
  Characterization of Material

- Extrusion & Compounding

- Polymer Testing

- Powdershape & Fibreshape

- 투과도 분석기         
 (Gas permeation testers)

- 제약 세라믹 촉매         
 (Pellet Extrusion and Spheronization)

- 온라인 실시간 공정용 분광 광도계         
 (In-Line Process Spectrophotometers)



 Cold Flex Temperature
제조사명
Microtec
품목명
[K] Polymer Testing

BS2782 : Part 1:Method 104B 에 의해 저온에서 플라스틱 재료의 뻣뻣한 정도 (Stiffness) 를 측정합니다.
연질 PVC 압출 재료의 저온 굴곡 시험에 사용됩니다.

   
 



 
Product Description
Cold Flex Temperature Tests. Conforms to BS2782 : Part 1:Method 104B. Determines the effects of low temperatures on the stiffness of the polymer material. The appartus consists of a fixed clamp and a revolving clamp which holds the test sample rigidly at each end. The test sample is submerged in a Low Temperature Liquid Bath. The revolving clamp connects to a pulley dial indicator, graduated in 1 degrees, which is subject to a given torque produced by a dead load acting at a fixed radius.
Test Description
The pulley dial inicator is locked in the zero position by a punger. The initial temperature is set so that when the plunger is released, the test sample twists about 30 deg C. The temperature is then increased by 2 deg C / min and the amount of twist measured every 5 deg C. When the angle of twist obtained is 400 degrees or greater, the resultant temperature is recorded.
Part Numbers
RR/CFLEX
Complies with Standard(s)
BS 2782 : PART 1: METHOD 104B

  test